HUANG Chunwei, ZHANG Xusheng, GUO Liang. Simulation and Design of Infrared Heating Cage Based on Micro-Space Camera[J]. Infrared Technology , 2024, 46(2): 138-143.
Citation: HUANG Chunwei, ZHANG Xusheng, GUO Liang. Simulation and Design of Infrared Heating Cage Based on Micro-Space Camera[J]. Infrared Technology , 2024, 46(2): 138-143.

Simulation and Design of Infrared Heating Cage Based on Micro-Space Camera

More Information
  • Received Date: April 22, 2022
  • Revised Date: May 15, 2022
  • In spacecraft thermal control technology, infrared heating cages are used to simulate the external heat flow reaching each surface; however, the rationality and accuracy of this method must be re-evaluated when the feature size of the simulated surface decreases progressively. In this study, simulation analysis and design optimization of infrared heating cages were conducted based on a micro-space camera with the most sensitive heat dissipation surface for external heat flow. The finite element method was used to establish a simulation model of the infrared heating cage black-sheet heat flow meter system, and the influence of the traditional infrared heating cage control method on the total arrival energy and heat flow density uniformity of the simulated surface was analyzed. The results show that the heat flow density uniformity of the simulated surface was improved by appropriately enlarging the heating cage and adjusting the position of the heat flow meter paste to ensure that the total arrival energy satisfied the conservative design principle. The statistical variances in the heat flow density of the radiator surface before and after the optimized design were 102.0 and 27.0, respectively, and the homogenization effect was significant. This study can be used as a reference for the accurate simulation of heat flows on other tiny space surfaces.
  • [1]
    侯增祺, 胡金刚. 航天器热控制技术-原理及其应用[M]. 北京: 中国科学技术出版社, 2007.

    HOU Zengqi, HU Jingang. Spacecraft Thermal Control Technology: Principles and Applications[M]. Beijing: China Science and Technology Press, 2007.
    [2]
    黄本诚, 马有礼. 航天器空间环境试验技术[M]. 北京: 国防工业出版社, 2002.

    HUANG Bencheng, MA Youli. Space Environment Test Technology of Spacecraft[M]. Beijing: National Defence Industry Press, 2002.
    [3]
    刘绍然, 许忠旭, 张春元, 等. "希望一号"卫星热平衡试验的误差分析[J]. 航天器环境工程, 2012, 29(5): 514-521. https://www.cnki.com.cn/Article/CJFDTotal-HTHJ201205009.htm

    LIU Shaoran, XU Zhongxu, ZHANG Chunyuan. The error analysis of satellite thermal balance test for Xiwang-1 satellite[J]. Spacecraft Environment Engineering, 2012, 29(5): 514-521. https://www.cnki.com.cn/Article/CJFDTotal-HTHJ201205009.htm
    [4]
    高庆华, 毕研强, 王晶, 等. 红外加热笼进行瞬态外热流模拟的优化方法[J]. 航天器环境工程, 2017, 34(3): 284-289.

    GAO Qinghua, BI Yanqiang, WANG Jing, et al. Optimization method for transient heat flux simulation with infrared heating cage[J]. Spacecraft Environment Engineering, 2017, 34(3): 284-289.
    [5]
    王刘杰, 黄伟芬, 徐水红, 等. 舱外航天服热试验外热流模拟方法改进研究[J]. 航天器环境工程, 2012, 29(5): 508-513. https://www.seejournal.cn/article/id/7662dfcb-ce48-4bb2-a190-dd94c0663cc1

    WANG Liujie, HUANG Weifen, XU Shuihong, et al. Improved method of simulating outer heat flux for EVA spacesuit thermal vacuum test[J]. Spacecraft Environment Engineering, 2012, 29(5): 508-513. https://www.seejournal.cn/article/id/7662dfcb-ce48-4bb2-a190-dd94c0663cc1
    [6]
    杨晓宁, 孙玉玮, 余谦虚. 提高红外灯阵热流模拟均匀性的优化设计方法[J]. 航天器环境工程, 2012, 29(1): 27-31. https://www.seejournal.cn/article/id/5fc1e1d2-3636-4691-9594-d9e431a41005

    YANG Xiaoning, SUN Yuwei, YU Qianxu. The optimized design for improving flux uniformity of infrared lamp array[J]. Spacecraft Environment Engineering, 2012, 29(1): 27-31. https://www.seejournal.cn/article/id/5fc1e1d2-3636-4691-9594-d9e431a41005
    [7]
    杨晓宁, 孙玉玮. 红外加热笼覆盖系数对热流均匀性的影响研究[J]. 航天器工程, 2008(5): 38-41.

    YANG Xiaoning, SUN Yuwei. Influence of infrared heating cage coverage coefficient on flux uniformity[J]. Spacecraft Engineering, 2008(5): 38-41.
    [8]
    季琨, 张丽新. 卫星真空热试验用红外加热笼抗热干扰设计[J]. 航天器环境工程, 2009, 26(3): 236-239. https://www.seejournal.cn/article/id/299cb8f1-0164-4ff1-9782-435e700e5fdd

    JI Kun, ZHANG Lixin. Anti-disturbance design of infrared heating cage in vacuum thermal test for satellite[J]. Spacecraft Environment Engineering, 2009, 26(3): 236-239. https://www.seejournal.cn/article/id/299cb8f1-0164-4ff1-9782-435e700e5fdd
    [9]
    韩继广, 陶晶亮, 盖照亮, 等. 航天器热平衡试验用大面阵外热流动态模拟系统设计及应用验证[J]. 航天器环境工程, 2019, 36(5): 495-501. DOI: 10.12126/see.2019.05.014

    HAN J G, TAO J L, GAI Z L, et al. Design and application verification of large-area heat flow dynamic simulation system in thermal balance test of spacecraft[J]. Spacecraft Environment Engineering, 2019, 36(5): 495-501. DOI: 10.12126/see.2019.05.014
    [10]
    孙玉玮, 杨晓宁. 红外加热笼边缘效应对卫星表面热流均匀性的影响研究[J]. 航天器环境工程, 2006, 23(4): 222-226. https://www.seejournal.cn/article/id/c19fe4ec-581d-4f80-bbb7-95979a63ce6b

    SUN Yuwei, YANG Xiaoning. The margin effect of infrared heating array on the flux uniformity on spacecraft surface[J]. Spacecraft Environment Engineering, 2006, 23(4): 222-226. https://www.seejournal.cn/article/id/c19fe4ec-581d-4f80-bbb7-95979a63ce6b
    [11]
    孙玉玮, 杨晓宁, 李春杨. 圆台形红外加热笼仿真优化研究[J]. 航天器环境工程, 2011, 28(3): 222-227. DOI: 10.12126/see.2011.03.003

    SUN Yuwei, YANG Xiaoning, LI Chunyang. Simulation study for the optimal design of conical infrared heating cage[J]. Spacecraft Environment Engineering, 2011, 28(3): 222-227. DOI: 10.12126/see.2011.03.003
    [12]
    谢吉慧, 苏新明, 秦家勇, 等. 大型航天器与外热流模拟装置的数字化结构匹配方法[J]. 航天器环境工程, 2018, 35(3): 288-292. DOI: 10.12126/see.2018.03.015

    XIE J H, SU X M, QIN J Y, et al. A digital method for structure matching between large spacecraft and external heat flux simulation device[J]. Spacecraft Environment Engineering, 2018, 35(3): 288-292. DOI: 10.12126/see.2018.03.015
    [13]
    房红军, 徐志明, 宁东坡, 等. 微纳卫星热平衡试验热流计布点优化方法[J]. 航天器工程, 2021, 30(2): 136-141.

    FANG Hongjun, XU Zhiming, NING Dongpo. Optimization method of radiometer placement for micro-nano satellite thermal balance test[J]. Spacecraft Engineering, 2021, 30(2): 136-141.
  • Related Articles

    [1]FENG Fan, XIN Daxin, HUA Jin, LIU Peng. High-temperature Furnace Slag Positioning Method for Slag Discharging Manipulator Based on Near-infrared Vision[J]. Infrared Technology , 2019, 41(2): 194-201.
    [2]LI Hui, XU Shihai, GAO Fei, XU Yongkuan. Study of Surface Roughness of CdS in CMP[J]. Infrared Technology , 2018, 40(10): 931-935.
    [3]WANG Jingyu, SONG Linwei, KONG Jincheng, WU Jun, HONG Yan, ZHANG Yang, LI Dongsheng. Study of Chemo-mechanical Polishing Process of Long-wave HgCdTe Film Grown by LPE[J]. Infrared Technology , 2018, 40(10): 925-930.
    [4]GUO Sheng, XIN Sishu, GONG Xiaoxia, YUAN Jun, GUO Jie. Research on Surface Polishing and Corrosion of InSb Chip[J]. Infrared Technology , 2018, 40(2): 133-138.
    [5]AO Menghan, ZHU Lihui, SUN Shiwen. Research on Chemical-mechanical Polishing Slurry for CdZnTe Crystal[J]. Infrared Technology , 2017, 39(1): 22-26.
    [6]ZHANG Yang, HUANG Yong-gang, LIU Hui, WANG Yun, LYU Xue-liang. Material Removal Property in Double-sided Polishing Process for Microchannel Plates[J]. Infrared Technology , 2014, (4): 336-342.
    [7]XIANG Jun-rong, LI Ming-hua, ZHANG Lei. Research of Polishing Technology for InSb Semiconductor Materials[J]. Infrared Technology , 2009, 31(11): 625-627. DOI: 10.3969/j.issn.1001-8891.2009.11.002
    [8]ZHANG Mei, HUANG Hui. The Analyses of Cadmium Zinc Telluride Wafers by Mechanical Chemical Polishing[J]. Infrared Technology , 2008, 30(2): 111-113. DOI: 10.3969/j.issn.1001-8891.2008.02.013
    [9]ZHANG Yi, BAI Lian-fa, CHEN Qian, GU guo-hua, ZHANG Bao-min. Non-Mechanical Micro-scan Technology Based on Infrared TFT-LCD[J]. Infrared Technology , 2007, 29(9): 518-523. DOI: 10.3969/j.issn.1001-8891.2007.09.007
    [10]A Mechanical Design of Optical-Near Infrared Camera CASCAM[J]. Infrared Technology , 2004, 26(4): 20-24,30. DOI: 10.3969/j.issn.1001-8891.2004.04.005
  • Cited by

    Periodical cited type(2)

    1. 赵超,孔忠弟,董涛,吴卿,折伟林,王小龙,徐鹏艳,李乾,李达,李聪聪. 5英寸锑化铟晶片加工及表征. 人工晶体学报. 2022(12): 2014-2021 .
    2. 孔忠弟,赵超,董涛. 锑化铟抛光片表面粗糙度优化研究. 红外. 2022(12): 20-25 .

    Other cited types(0)

Catalog

    Article views PDF downloads Cited by(2)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return