Citation: | XU Lixia, YANG Yaodong, LIU Lixia, WANG Fei, LI Xiaqiao, CHEN Dongkangkang, WAN Lei, SONG Wenli. Infrared Thermography Detection for Bonding Quality of Soft Foam Sandwich Composite Structures[J]. Infrared Technology , 2024, 46(11): 1334-1338. |
Because of the demand for nondestructive testing of the bonding quality of soft foam composite structures, excitation mode research was conducted, and the pulsed infrared thermal image mode was determined suitable. A first-derivative processing method was used to form a featured image, which improved the image signal-to-noise ratio and defect resolution. Debonding defects in the specimens were effectively identified using the constructed neural network recognition software. The results revealed that the risk of false and missing detections in manual evaluation can be reduced by intelligent detection, and that the detection efficiency can be improved. The above research meets the requirements for the rapid detection of soft foam composite structures in spacecrafts.
[1] |
杨富凯, 张玉迪, 邓玉媛等. 聚酰亚胺泡沫材料的性能研究概述[J]. 中国塑料, 2020, 34(11): 94-101.
YANG Fukai, ZHANG Yudi, DENG Yuyuan, et al. Research progress in polyimide foam materials[J]. China Plastics, 2020, 34(11): 94-101.
|
[2] |
GU W, WANG G, ZHOU M, et al. Polyimide-based foams: fabrication and multifunctional applications[J]. ACS Applied Materials & Interfaces, 2020, 12(43): 48246-48258.
|
[3] |
ZHANG Y Z, ZHANG G C, SUN X F, et al. Properties and microstructure study of polyimide foam plastic[J]. Cellular Polymers, 2010, 29(4): 211-226. DOI: 10.1177/026248931002900401
|
[4] |
LUO Y F, NI L, ZHANG X Q, et al. Fabrication of rigid polyimide foams with superior compressive properties[J]. Industrial & Engineering Chemistry Research, 2022, 61(2): 1089-1099.
|
[5] |
NI L, LUO Y, QIU B, et al. Combining microwave-assisted foaming and post curing process to prepare lightweight flexible polyimide foams for thermal insulation applications[J]. Macromolecular Materials and Engineering, 2022, 307(7): 2100941. DOI: 10.1002/mame.202100941
|
[6] |
NI L, LUO Y, QIU C, et al. Mechanically flexible polyimide foams with different chain structures for high temperature thermal insulation purposes[J]. Materials Today Physics, 2022, 26: 100720. DOI: 10.1016/j.mtphys.2022.100720
|
[7] |
李强. 聚酰亚胺泡沫成型过程及功能化研究[D]. 上海: 东华大学, 2022.
LI Qiang. Study on the Foaming Process and Functionalization of Polyimide Foam[D]. Shanghai: Donghua University, 2022.
|
[8] |
张莹. 耐高温聚酰亚胺结构泡沫材料制备及力学性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2018.
ZHANG Ying. Preparation and Mechanical Properties of High Temperature Resistant Polyimide Foam[D]. Harbin: Harbin Engineering University, 2018.
|
[9] |
李振. 聚酰亚胺泡沫多层夹芯结构的无损检测研究[D]. 廊坊: 北华航天工业学院, 2019.
LI Zhen. Study on Nondestructive Testing of Polyimide Foam Multilayer Sandwich Structure[D]. Langfang: Beihua Aerospace Institute of Technology, 2019.
|
[10] |
MONIE F, VIDIL T, GRIGNARD B, et al. Self-foaming polymers: opportunities for the next generation of personal protective equipment[J]. Materials Science and Engineering, 2021, 145: 100628. DOI: 10.1016/j.mser.2021.100628
|
[1] | WANG Chongwen, PENG Tinghai, LUO Rui, LIU Jian, YANG Yuping, WANG Shijin, YAN Tingyu, GE Fan, LIU Yanfang, LIU Yunhong. Tropical Marine Environmental Adaptability of Germanium Coated Infrared Antireflection Film[J]. Infrared Technology , 2024, 46(8): 957-964. |
[2] | WANG Qiaofang, WANG Chongwen, ZHENG Wanxiang, LIU Jian, LUO Rui, ZHAO Yuanrong. Corrosion Properties of Phosphate Glass Filter under Different Environments[J]. Infrared Technology , 2020, 42(10): 947-952. |
[3] | CHENG Haijuan, YANG Weisheng, CAI Yi, YU Xiaohui, LI Rujie, WANG Ke, ZHAO Jinsong, WANG Lingxue. High-Performance LWIR Antireflective Films Fabrication on Ge Substrate Using LaF3 as Low Refractive Index Material[J]. Infrared Technology , 2020, 42(8): 758-762. |
[4] | GUO Sheng, XIN Sishu, GONG Xiaoxia, YUAN Jun, GUO Jie. Research on Surface Polishing and Corrosion of InSb Chip[J]. Infrared Technology , 2018, 40(2): 133-138. |
[5] | YANG Yuping, ZI Zhenghua, ZHONG Hui, JIANG Xuejun, LI Daqing, LIU Jian, ZHAO Yuanrong. Impact of Fungus on Films on Ge, ZnS and ZnSe[J]. Infrared Technology , 2016, 38(12): 1078-1081. |
[6] | ZI Zheng-hua, WANG Qiao-fang, LIU Jian, ZHAO Yuan-rong, LI Ru-jie. Corrosion Properties of LB6 Filter in Tropical Oceanic Climate Environment[J]. Infrared Technology , 2015, 37(11): 943-948. |
[7] | WANG Qiao-Fang, ZI Zheng-Hua, LI Ru-jie, TAN Ji, YANG Jing, LE Li-zhu. Corrosion Properties of Germanium IR Window in Tropical Rainforest Environment[J]. Infrared Technology , 2014, (12): 964-966. |
[8] | SUN Yan-chun, SUN Bu-sheng, MA Qi-shuang. Progress of Hidden Corrosion Detection in Aircraft[J]. Infrared Technology , 2007, 29(2): 121-123. DOI: 10.3969/j.issn.1001-8891.2007.02.016 |
[9] | SONG Chao, KONG Ling-de, YANG Yu. Study on the Photoluminescence Properties of Ge/Si multilayer Films Deposited by Magnetron Sputtering[J]. Infrared Technology , 2007, 29(2): 67-70. DOI: 10.3969/j.issn.1001-8891.2007.02.002 |
[10] | WU xiao-kun, YANG Yu, WU Xing-hui. Theoretical Study for Determining the Ge Crystal-Size of Gex/Si1-x Multilayer by Raman Scattering Spectra[J]. Infrared Technology , 2001, 23(1): 15-18. DOI: 10.3969/j.issn.1001-8891.2001.01.005 |