Advanced Search
中文
Volume 43 Issue 8
Aug.  2021
Turn off MathJax
Article Contents
Abstract
References
Related Articles
ZHANG Zhipeng, SHAO Xuejun, PANG Qing. Research on the Key Technology of 3D Laser Inverted Scanning[J]. Infrared Technology , 2021, 43(8): 752-756.
Citation: ZHANG Zhipeng, SHAO Xuejun, PANG Qing. Research on the Key Technology of 3D Laser Inverted Scanning[J]. Infrared Technology , 2021, 43(8): 752-756.
shu

Research on the Key Technology of 3D Laser Inverted Scanning

  • China Academy of Railway Sciences Corporation Limited, Beijing 100081, China

More Information
  • Received Date: July 07, 2020
  • Revised Date: July 29, 2021
    Graphical Abstract
    • Abstract
  • The key technologies of 3D laser inverted scanning are mainly studied through the introduction of conventional 3D laser positive scanning technology. The inverted scanning incident angle technology was researched, and the hardware tripod inverted installation conditions were determined to attain a reasonable scanning incident angle and achieve a good acquisition effect of point clouds. On the software side, the technology of efficient and automatic noise removal was examined to realize the automatic and efficient removal of noise in inverted scanning. Through experimental comparison, the key technology of 3D laser inversion scanning can be used to achieve better inversion scanning and scanning results. Moreover, it can be used to reduce the intensity of work, improve work efficiency, and expand the application field of 3D laser scanning. The application fields of 3D laser scanning technology have expanded, and can be used as a reference in the application of inverted scanning technology, automatic and high-efficiency noise processing technology, and so on. Furthermore, this method provides a reference for infrared technology in image fusion, image information recognition, image noise reduction, and so on.
    • FullText(HTML)
    • References (17)
  • [1]
    国家市场监督管理总局. 铁路罐车和罐式集装箱容积三维激光扫描仪校准规范[S]. JJF1719-2018: 北京: 中国质检出版社, 2019.

    State Administration of market supervision. Calibration Specification for 3D Laser Scanner for Volume Measurements of Rail Tankers and Tank Containers[S]. JJF1719-2018: Beiing: China Quality Inspection Press, 2019.
    [2]
    白汉学. 三维激光扫描仪伺服控制系统与数据采集系统的设计与实现[D]. 西安: 西北工业大学, 2003: 66-92.

    BAI Hanxue. Design and Implementation of Servo Control and Date Acquire System for 3D Laser Scanner[D]. Xi'an: Northwestern Polytechnical University, 2003: 66-92.
    [3]
    蔡宽. 基于点云的三维重建技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2010.

    CAI Kuan. Research on 3D Reconstruction Technology Based on Point Cloud[D]. Dissertation of Harbin Institute of Technology, 2010: 38-86.
    [4]
    傅青喜. 铁路罐车容积检定与计量[M]. 北京: 中国计量出版社, 2005: 9-29.

    FU Qingxi. Volume Verification and Measurement of Railway Tank Car. Beijing: China Metrology Publishing, 2005: 9-29.
    [5]
    邵学君. 铁路罐车(箱)容积三维激光扫描测量方法[J]. 中国铁道科学, 2014(2): 79-85. DOI: 10.3969/j.issn.1001-4632.2014.02.13

    SHAO Xuejun. Three-dimensional laser scanning method for volume measurement of railway tank car (box)[J]. China Railway Science, 2014 (2): 79-85. DOI: 10.3969/j.issn.1001-4632.2014.02.13
    [6]
    孙君顶, 赵慧慧. 图像稀疏表示及其在图像处理中的应用[J]. 红外技术, 2014(7): 533-537. http://hwjs.nvir.cn/article/id/hwjs201407004

    SUN Junding, ZHAO Huihui. Sparse representation and applications in image processing[J]. Infrared Technology, 2014(7): 533-537. http://hwjs.nvir.cn/article/id/hwjs201407004
    [7]
    汪开理. 三维激光点云与全景影像匹配融合方法[J]. 测绘通报, 2013(12): 131-132. https://www.cnki.com.cn/Article/CJFDTOTAL-CHTB201312041.htm

    WANG Kaili. A method of matching and fusion of 3D laser point cloud and panoramic image[J]. Mapping Bulletin, 2013 (12): 131-132. https://www.cnki.com.cn/Article/CJFDTOTAL-CHTB201312041.htm
    [8]
    Behzad V Farahani, Francisco Barros, Mihai A Popescu, et al. Geometry acquisition and 3D modelling of a wind tower using a 3D laser scanning technology[J]. Procedia Structural Integrity, 2019(9): 712-717. http://www.sciencedirect.com/science/article/pii/S2452321619303014
    [9]
    张靖, 周明全, 张雨禾, 等. 基于马尔可夫随机场的散乱点云全局特征提取[J]. 自动化学报, 2013(12): 131-132.

    ZHANG Jing, ZHOU Mingquan, ZHANG Yuhe, et al. Global feature extraction of scattered point cloud based on Markov random field[J]. Journal of Automation, 2013 (12): 131-132.
    [10]
    张志鹏. 基于铁路罐车(箱)容积三维激光回波强度D模型的入射角特性研究[J]. 应用激光, 2017(4): 609-613. https://www.cnki.com.cn/Article/CJFDTOTAL-YYJG201704024.htm

    ZHANG Zhipeng. Study on the geometric characters of D-model of the 3D laser scanning[J]. Applied Laser, 2017(4): 609-613. https://www.cnki.com.cn/Article/CJFDTOTAL-YYJG201704024.htm
    [11]
    毕超, 刘京亮, 刘飞, 等. 激光测头的光束空间矢量标定方法[J]. 红外与激光工程, 2015(12): 3775-3777. DOI: 10.3969/j.issn.1007-2276.2015.12.047

    BI Chao, LIU Jingliang, LIU Fei, et al. Calibration method of space vector of beam for point laser sensor[J]. Infrared and Laser Engineering, 2015(12): 3775-3777. DOI: 10.3969/j.issn.1007-2276.2015.12.047
    [12]
    Bruno Silva Marció, Philipp Nienheysen, Daniel Habor, et al. Quality assessment and deviation analysis of three-dimensional geometrical characterization of a metal pipeline by pulse-echo ultrasonic and laser scanning techniques[J]. Measurement, 2019(10): 30-37.
    [13]
    谢雄耀, 卢晓智, 田海洋, 等. 基于地面三维激光扫描技术的隧道全断面变形测量方法[J]. 测绘通报, 2016(2): 143-144. https://www.cnki.com.cn/Article/CJFDTOTAL-CHTB201602037.htm

    XIE Xiongyao, LU Xiaozhi, TIAN Haiyang, et al. Development of a modeling method for monitoring tunnel deformation based on terrestrial 3D laser scanning[J]. Bulletin of Surveying and Mapping, 2016(2): 143-144. https://www.cnki.com.cn/Article/CJFDTOTAL-CHTB201602037.htm
    [14]
    Siwei Chen, Megan L Walske, Ian J Davies. Rapid mapping and analyzing rock mass discontinuities with 3D terrestrial laser scanning in the underground excavation[J]. International Journal of Rock Mechanics and Mining Sciences, 2018(10): 28-35. http://www.sciencedirect.com/science/article/pii/S1365160917309589
    [15]
    Johannes Schauer, Andreas Nüchter. Removing non-static objects from 3D laser scan data[J]. Journal of Photo Grammetry and Remote Sensing, 2018(7): 21-26. http://www.sciencedirect.com/science/article/pii/S0924271618301527
    [16]
    郭震冬, 黄亮, 顾正东, 等. 三维激光扫描技术在古建筑测量中的应用[J]. 智能城市, 2019(9): 1-2. https://www.cnki.com.cn/Article/CJFDTOTAL-ZNCS201918002.htm

    GUO Zhendong HUANG liang GU Zhengdong et al. Application of 3D laser scanning technique in ancient building survey[J]. Intelligent City, 2019(9): 1-2. https://www.cnki.com.cn/Article/CJFDTOTAL-ZNCS201918002.htm
    [17]
    Daniel Nåfors, Maja Bärring, Maxime Estienne, et al. Supporting discrete event simulation with 3D laser scanning and value stream mapping: benefits and drawbacks[J]. Procedia CIRP, 2018(7): 1536-1541. http://www.sciencedirect.com/science/article/pii/S2212827118303779
    • Related Articles

  • Related Articles

    [1]BAI Xiaofeng, ZHANG Lei, YAN Shijun, QIAN Yunsheng, ZHANG Qin, SU Yue, CHENG Hongchang, CHENG Wei, LI Qi. Measurement of Signal to Noise Ratio of UV Image Intensifier Assembly[J]. Infrared Technology , 2024, 46(11): 1302-1307.
    [2]WANG Jialong, LIU Yanzhen, YANG Xiaokun, HUANG Fuyun, YANG Chaowei, LI Xiongjun. Surface Treatment Method of Near-Stoichiometric Ratio HgCdTe Film[J]. Infrared Technology , 2024, 46(6): 646-653.
    [3]CHANG Shanshan, MA Yunfeng, LIAO Lifen, ZHAO Peng, CHENG Wang, FAN Zhongwei. Measurement of Extinction Ratio of Brewster Angle Polarizer Based on Air Gap Prism[J]. Infrared Technology , 2019, 41(9): 882-886.
    [4]SANG Xueyi, JI Honghu, WANG Ding. Influence of Length-Diameter Ratio and Offset-Diameter Ratio on Performance of Serpentine 2-D Nozzle[J]. Infrared Technology , 2019, 41(5): 443-449.
    [5]Image Fusion Algorithm for Visual and Infrared Image Based on Local Energy Ratio[J]. Infrared Technology , 2008, 30(4): 221-224. DOI: 10.3969/j.issn.1001-8891.2008.04.010
    [6]CHEN Wei-zhen, ZHANG Chun-hua, ZHOU Xiao-dong. A Study on Luminosity Features and Signal Noise Ratio of Space Target[J]. Infrared Technology , 2007, 29(12): 716-719. DOI: 10.3969/j.issn.1001-8891.2007.12.009
    [7]LI Hui, QIAN Yun-sheng, CHANG Ben-kang, LIU Lei, XIA Yang, LI Shi-yi. The Research of K Factor for Signal-to-noise Ratio of LLLIntensifier[J]. Infrared Technology , 2007, 29(8): 488-490. DOI: 10.3969/j.issn.1001-8891.2007.08.015
    [8]PU Li, JIN Wei-qi, LIU Yu-shu, SU Bing-hua, ZHANG Nan. A Study of Wavelet Bi-cubic Ratio Interpolation Algorithm[J]. Infrared Technology , 2006, 28(8): 453-455. DOI: 10.3969/j.issn.1001-8891.2006.08.005
    [9]CHEN Xi, TONG Ming-ming, XING Ji-chuan. A Research on Testing of Optic-crystal Extinction-ratio[J]. Infrared Technology , 2006, 28(7): 388-390. DOI: 10.3969/j.issn.1001-8891.2006.07.004
    [10]Transmission of Two Wave Bands Infrared Radiation Ratio of Aerial Object in the Atmosphere[J]. Infrared Technology , 2003, 25(1): 40-43. DOI: 10.3969/j.issn.1001-8891.2003.01.009

  • Cited by

    Periodical cited type(5)

    1. 杨志勇，王晓伟，杨雨豪，张明娣，张志伟. 分时型长波红外偏振成像系统图像配准研究. 火箭军工程大学学报. 2024(05): 44-52 .
    2. 杨天敏，王晓燕. 偏振图像融合的人脸图像增强研究. 激光杂志. 2023(03): 148-152 .
    3. 宿德志，李慧，刘亮，张纪磊. 分时偏振成像系统旋转角度误差校正. 舰船电子工程. 2023(09): 36-41 .
    4. 马一哲，王世勇，雷腾，李范鸣. 基于连续旋转的准实时偏振探测系统成像模型与误差分析（特邀）. 光电技术应用. 2022(05): 82-87+102 .
    5. 张杨，聂亮，陈超，王天澳，史少聪. 基于偏振成像均衡化的目标对比度提升研究. 应用激光. 2022(12): 137-146 .

    Other cited types(4)

Catalog

    Get Citation
    PDF
    XML
    Article views (228) PDF downloads (34) Cited by(9)
    Related

    Copyright © 《Infrared Technology》Editorial Office滇ICP备12000354号-3

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return