JIAO Songfeng, XIE Qiming, LIU Yao, WANG Yizhuo, FAN Wei, YOU Jinjing, YANG Yonghua, ZHANG Chengang. Optical Aspheric Surface Profile Testing Technology[J]. Infrared Technology , 2023, 45(5): 534-540.
Citation: JIAO Songfeng, XIE Qiming, LIU Yao, WANG Yizhuo, FAN Wei, YOU Jinjing, YANG Yonghua, ZHANG Chengang. Optical Aspheric Surface Profile Testing Technology[J]. Infrared Technology , 2023, 45(5): 534-540.

Optical Aspheric Surface Profile Testing Technology

More Information
  • Received Date: September 16, 2022
  • Revised Date: December 11, 2022
  • With the progress of science and technology, cutting-edge products and advanced photoelectric systems have increasingly higher requirements regarding the imaging quality of the optical system. Optical aspheric elements, which are widely used, can effectively correct the aberration, reduce the number of optical elements required by the system, and reduce the weight of the system. Because of the specific surface characteristics, machining and testing such systems are more difficult than for spherical particles; the testing accuracy directly determines the processing accuracy, and the importance of aspheric testing technology is obvious. Herein, the testing technology of optical aspheric surface is summarized according to measuring principle; As direct surface profilometry is widely used in optical aspheric surface machining, combined with the latest testing methods, the measurement technology of aspheric surface direct surface profilometry is mainly introduced; The application of freeform surface and surface profilometry in freeform surface testing, which has attracted increasing attention in recent years, is introduced; Finally, the present situation and development trend of aspheric surface testing technology are summarized.
  • [1]
    张小兵. 非球面光学元件加工及检测技术综述[J]. 兵器材料科学与工程, 2014, 37(2): 106-111. https://www.cnki.com.cn/Article/CJFDTOTAL-BCKG201402038.htm

    ZHANG Xiaobing. Review on machining and testing technology of aspheric optical elements[J]. Ordnance Materials Science and Engineering, 2014, 37(2): 106-111. https://www.cnki.com.cn/Article/CJFDTOTAL-BCKG201402038.htm
    [2]
    FORBES G W. Shape specification for axially symmetric optical surfaces[J]. Optics Express, 2007, 15(8): 5218-5226. DOI: 10.1364/OE.15.005218
    [3]
    谢启明. 单点金刚石切削在红外光学的应用[D]. 昆明: 昆明物理研究所, 2002.

    XIE Qiming. Application of Single Point Diamond Cutting in Infrared Optics[D]. Kunming: Kunming Institute of Physics, 2002.
    [4]
    师途, 杨甬英, 张磊, 等. 非球面光学元件的面形检测技术[J]. 中国光学, 2014, 7(1): 26-46. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGA201401002.htm

    SHI Tu, YANG Yongying, ZHANG Lei, et al. Surface shape detection technology of aspherical optics[J]. Chinese Optics, 2014, 7(1): 26-46. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGA201401002.htm
    [5]
    闫峰涛, 范斌, 侯溪, 等. 基于子孔径拼接的Hindle球检测法[J]. 强激光与粒子数, 2012, 24(11): 2555-2559. https://www.cnki.com.cn/Article/CJFDTOTAL-QJGY201211010.htm

    YAN Fengtao, FAN Bin, HOU Xi, et al Hindle ball detection method based on sub aperture stitching[J]. Intense Laser and Particle Number, 2012, 24(11): 2555-2559 https://www.cnki.com.cn/Article/CJFDTOTAL-QJGY201211010.htm
    [6]
    ALIKENS D M, WOLFE C R. Use of power spectral density(PSD) functions in specifying optics for the National Ignition Facility[C]//Proc. of SPIE, 1995, 2576: 2812292.
    [7]
    BRAY M. Stitching interferometry: how and why it works[C]//Proc. of SPIE, 1999, 3739: 259-273.
    [8]
    刘崇. 非球面环形子孔径拼接干涉测试方法研究[D]. 南京: 南京理工大学, 2009.

    LIU Chong. Research on Measurement Method of Aspheric Ring Subaperture Splicing Interference[D]. Nanjing: Nanjing University of Science and Technology, 2009.
    [9]
    潘君骅. 光学非球面的设计、加工与检测[M]. 苏州: 苏州大学出版社, 2004.

    PAN Junhua. Design, Machining and Testing of Optical Aspheric Surface [M]. Suzhou: Soochow University Press, 2004.
    [10]
    王洪臣. 二次旋转曲面法线等距离线加工法及机床研制[D]. 长春: 长春理工大学, 2007.

    WANG Hongchen. Normal Isometric Machining Method of Quadratic Rotary Surface and Machine Tool Development[D]. Changchun: Changchun University of Science and Technology, 2007.
    [11]
    贾世奎, 李成贵, 杨辉, 等. 非球面光学元件面形检测方法[J]. 上海计量测试, 2009, 36(5): 2-6. https://www.cnki.com.cn/Article/CJFDTOTAL-SJLC200905005.htm

    JIA Shikui, LI Chenggui, YANG Hui, et al. Surface shape detection method of aspherical optical elements[J]. Shanghai Metrological Measurement, 2009, 36(5): 2-6. https://www.cnki.com.cn/Article/CJFDTOTAL-SJLC200905005.htm
    [12]
    杨志文. 光学测量[M]. 北京: 北京理工大学出版社, 1995.

    YANG Zhiwen. Optical Measurement[M]. Beijing: Beijing Institute of Technology Press, 1995.
    [13]
    普里亚耶夫. 光学非球面检验[M]. 北京: 科学出版社, 1982.

    Priayev. Optical Aspherical Testing[M]. Beijing: Science Press, 1982.
    [14]
    马天宇. 基于激光干涉测量原理的轮廓测量系统[D]. 杭州: 浙江理工大学, 2018.

    MA Tianyu. Profile Measurement System Based on Laser Interferometry Principle[D]. Hangzhou: Zhejiang Sci-Tech University, 2018.
    [15]
    王孝坤. 激光跟踪仪检验非球面面形的方法[J]. 光子学报, 2012, 41(4): 379-383. https://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201204002.htm

    WANG Xiaokun. A method to test aspheric surface shape with laser tracker[J]. Acta Photonica Sinica, 2012, 41(4): 379-383. https://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201204002.htm
    [16]
    李静, 杨辉, 李杰. 自由曲面光学元件检测方法研究[J]. 航空精密制造技术, 2019, 55(3): 31-33. https://www.cnki.com.cn/Article/CJFDTOTAL-HJZJ201903009.htm

    LI Jing, YANG Hui, LI Jie. Research on testing methods for free form surface optical elements[J] Aerospace Precision Manufacturing Technology, 2019, 55(3): 31-33 https://www.cnki.com.cn/Article/CJFDTOTAL-HJZJ201903009.htm
    [17]
    重庆孚纳科技有限公司. NMF高精度非接触三维轮廓仪产品手册[Z]. 2021.

    Chongqing Funa Technology Co. LTD. NMF High Precision Non-contact 3D Profiler Product Manual[Z]. 2021.
    [18]
    张磊, 刘东, 师途, 等. 光学自由曲面面形检测技术[J]. 中国光学, 2017, 10(3): 283-299. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGA201703001.htm

    ZHANG Lei, LIU Dong, SHI Tu, et al. Surface shape detection technology of optical free-form surface[J]. Chinese Optics, 2017, 10(3): 283-299. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGGA201703001.htm
    [19]
    吴仍茂. 自由曲面照明设计方法的研究[D]. 杭州: 浙江大学, 2013.

    WU Renmao. Research on Design Method of Free-form Surface Lighting[D]. Hangzhou: Zhejiang University, 2013.
    [20]
    TIAN F, YIN Z, LI S. Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrors[J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(9): 1759-1765. DOI: 10.1007%2Fs00170-015-7152-9.pdf
    [21]
    孟祥翔, 刘伟奇, 张大亮, 等. 双自由曲面大视场头盔显示光学系统设计[J]. 红外与激光工程, 2016, 45(4): 196-201. https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201604029.htm

    MENG Xiangxiang, LIU Weiqi, ZHANG Daliang, et al. Design of dual-free-form helmet display optical system with large field of view[J]. Infrared and Laser Engineering, 2016, 45(4): 196-201. https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201604029.htm
    [22]
    刘军, 黄玮. 反射式自由曲面头盔显示器光学系统设计[J]. 红外与激光工程, 2016, 45(10): 150-155. https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201610023.htm

    LIU Jun, HUANG Wei. Optical system design of reflective free-form helmet-mounted display[J]. Infrared and Laser Engineering, 2016, 45(10): 150-155. https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201610023.htm
    [23]
    WANG Q F, CHENG D W, WANG W T, et al. Design, tolerance, and fabrication of an optical see-through head-mounted display with free-form surface elements[J]. Applied Optics, 2013, 52(7): C88. http://www.opticsinfobase.org/ao/abstract.cfm?uri=ao-52-7-C88
    [24]
    赵伟, 刘旭, 李海峰. 基于自由曲面阵列的激光投影显示照明系统设计[J]. 光学学报, 2018, 38(6): 291-297. https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201806039.htm

    ZHAO Wei, LIU Xu, LI Haifeng. Design of laser projection display lighting system based on free-form surface array[J]. Acta Optica Sinica, 2018, 38(6): 291-297. https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201806039.htm
    [25]
    于百华. 基于自由曲面的超短焦投影物镜关键技术研究[D]. 长春: 中国科学院大学(中国科学院长春光学精密机械与物理研究所), 2019.

    YU Baihua. Research on Key Technologies of Ultra-short focal projection objective Based on Free-form Surface[D]. Changchun: University of Chinese Academy of Sciences(Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences), 2019.
    [26]
    朱日宏, 孙越, 沈华. 光学自由曲面面形检测方法进展与展望[J]. 光学学报, 2021, 41(1): 161-178. https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB202101012.htm

    ZHU Rihong, SUN Yue, SHEN Hua. Advances and prospects of surface shape detection methods for optical free-form surfaces[J]. Acta Optica Sinica, 2021, 41(1): 161-178. https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB202101012.htm
    [27]
    MENG Q Y, WANG H Y, LIANGW J, et al. Design of off-axis three-mirror systems with ultrawide field of view based on an expansion process of surface free-form and field of view[J]. Applied Optics, 2019, 58(3): 609-615.
  • Related Articles

    [1]JIN Yongwei, LIU Chunlong. Sensitivity Analysis of Thermal Design Parameters of High-Sensitivity Optical Detection Module[J]. Infrared Technology , 2025, 47(2): 141-147.
    [2]ZHANG Jiahong, JIA Zhuohang, GUO Liang, PENG Bo, WANG Weicheng. Thermal Design and Simulation Verification of High-precision Integrated Star Sensor in Near-Earth Orbit[J]. Infrared Technology , 2024, 46(4): 400-405.
    [3]WANG Shang, ZHANG Xingxiang, ZHU Junqing. Design and Analysis of All Aluminum Alloy Optical Mechanical Structure of Space Cameras[J]. Infrared Technology , 2022, 44(4): 364-370.
    [4]DU Yimin, JIA Xuezhi, AN Yuan, KE Shanliang. Design and Analysis of Focusing Mechanism for a High Resolution Space Camera[J]. Infrared Technology , 2019, 41(4): 305-310.
    [5]CHEN Zhizhou, CAO Kaiqin, MIAO Bin, CHAI Mengyang, LIU Shufeng, SUN Dexin, LIU Yinnian. Thermal Design of Electric Cabinet for Space Cameras[J]. Infrared Technology , 2017, 39(10): 880-883.
    [6]ZHU Cheng-xi, LI Yang, SHI Jia-ming. Thermal Design of One Infrared Imaging System Based on the Method of TSO Integrated Analysis[J]. Infrared Technology , 2015, (5): 380-386.
    [7]ZHAO Gao-fei, XIE Rong-jian, PEI Yun-tian. Heat Distortion Analysis of A Reflecting Mirror Used in Space Camera[J]. Infrared Technology , 2012, 34(1): 36-40. DOI: 10.3969/j.issn.1001-8891.2012.01.007
    [8]LIU Bi-liu, WANG Wen-wen, SONG Qing-lei, WANG Yong-qiang, XI Bo. Thermal Design Analysis and Application on the Surface Coating Materials of Spacecraft[J]. Infrared Technology , 2011, 33(5): 305-308. DOI: 10.3969/j.issn.1001-8891.2011.05.014
    [9]CAI Shi-ping, SHEN Guo-tu, CAI Ji-guang, DONG Zhan-hai, GAO Jing. Generation of the Finite Element Model and Its Application on Thermal Analysis[J]. Infrared Technology , 2009, 31(5): 279-282. DOI: 10.3969/j.issn.1001-8891.2009.05.009
    [10]Two-Dimensional Thermal Analysis of Multi-Layer Pyroelectric Thin Film Infrared Detector[J]. Infrared Technology , 2004, 26(1): 60-63,66. DOI: 10.3969/j.issn.1001-8891.2004.01.016
  • Cited by

    Periodical cited type(1)

    1. 刘一帆,周峰,胡斌,晋利兵. 全景环带二次成像红外光学系统设计. 航天返回与遥感. 2024(05): 23-30 .

    Other cited types(1)

Catalog

    Article views (342) PDF downloads (91) Cited by(2)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return