Study on Machining Technology of Large Aspheric Aluminum Reflector with Three Axis Linkage

XIAO Jiaoguo; YAO Tong; ZHANG Wanqing; LIU Yao; LUO Hong; LI Maozhong; HUANG Pan; KANG Jie; ZHANG Ruoyin

Volume 43 Issue 9

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Infrared Technology > 2021 > 43(9): 829-835

XIAO Jiaoguo, YAO Tong, ZHANG Wanqing, LIU Yao, LUO Hong, LI Maozhong, HUANG Pan, KANG Jie, ZHANG Ruoyin. Study on Machining Technology of Large Aspheric Aluminum Reflector with Three Axis Linkage[J]. Infrared Technology , 2021, 43(9): 829-835.

Citation:

PDF( 502 KB)

Study on Machining Technology of Large Aspheric Aluminum Reflector with Three Axis Linkage

1.
Yunnan KIRO Photonics Co., Ltd, Kunming 650200, China
2.
Kunming University of Science and Technology, Kunming 650500, China

Received Date: 2021-04-12
Rev Recd Date: 2021-04-21
Publish Date: 2021-09-20

Abstract

Abstract

To solve the problem of single point diamond turning(SPDT), technology was used for the processing of large diameter and chord height aspheric aluminum mirrors, which have the problems of limited lathe guide stroke, limited rotary volume of worktable, and low processing quality. To process a concave aspheric aluminum mirror with a diameter of φ682 mm and a chord height of 220 mm, first, a three-axis linkage processing method based on SPDT was proposed, which adds rotary b-axis on the basis of two-axis processing, such that the guide rail travel and table rotation volume can meet the processing requirements. Then, the special cage fixture was designed, and the influence of the number of supporting rods, the diameter of supporting rods, and the thickness of upper and lower connecting plates on the jig-work piece deformation characteristics were examined using the finite element method. The influence of different factors on the maximum deformation of jig and work piece was evaluated via range and variance analysis. A set of optimal jig design parameters was obtained, that is, the number of jig support rods was 24, the diameter of the rods was 22 mm, and the thickness of the upper and lower connecting plates was 25 mm. Finally, the aluminum mirror was fixed on the optimized cage clamp, and the processing of the φ682 mm aspheric aluminum mirror was realized through three-axis linkage processing. The test results show that the surface accuracy P_v of the tool adjusting part was 0.6 μm, and the surface roughness Ra was approximately 10.1 nm. It can be considered that the surface accuracy and surface roughness of the φ682 mm aspheric aluminum mirror can meet the requirements. This study can provide a theoretical basis and technological reference for the processing of the same type of large aperture and high chord aspheric mirror.
- large aperture mirror,
- single point diamond turning,
- three axis linkage machining,
- surface quality

FullText(HTML)

References(9)

References

[1]	陈达任, 李占杰, 靳刚, 等. 金属反射镜超精密加工研究进展[J]. 机械研究与应用, 2018, 31(1): 159-163. https://www.cnki.com.cn/Article/CJFDTOTAL-JXYJ201801053.htm CHEN Daren, LI Zhanjie, JIN Gang, et al. Review on Ultra－ Precision machining of metal reflector[J]. Mechanical Research & Application, 2018, 31(1): 159-163. https://www.cnki.com.cn/Article/CJFDTOTAL-JXYJ201801053.htm
[2]	谢启明, 杨静, 徐放, 等. 金属非球面反射镜的加工和检测技术[J]. 红外技术, 2015, 37(2): 119-123. http://hwjs.nvir.cn/article/id/hwjs201502007 XIE Qiming, YANG Jing, XU Fang, et al. Manufacturing and test technology for metal aspherical reflector[J]. Infrared Technology, 2015, 37(2): 119-123. http://hwjs.nvir.cn/article/id/hwjs201502007
[3]	李全超, 李蕾, 谭淞年, 等. 大口径铝合金主反射镜设计与分析[J]. 应用光学, 2016, 37(3): 337-341. https://www.cnki.com.cn/Article/CJFDTOTAL-YYGX201603003.htm LI Quanchao, LI Lei, TAN Songnian, et al. Design and analysis for large aperture primary aluminum mirrors[J]. Journal of Applied Optics, 2016, 37(3): 337-341. https://www.cnki.com.cn/Article/CJFDTOTAL-YYGX201603003.htm
[4]	Horst R T, Tromp N, MD Haan, et al. Directly polished lightweight aluminum mirror[C]//Advanced Optical & Mechanical Technologies in Telescopes & Instrumentation. International Society for Optics and Photonics, 2008: 701808-701808-10.
[5]	姜伟, 申德新, 王立波, 等. 大口径光学反射镜化学镀镍工艺及质量管理[J]. 电镀与涂饰, 2008(10): 13-16. https://www.cnki.com.cn/Article/CJFDTOTAL-DDTL200810008.htm JIANG Wei, SHEN Dexin, WANG Libo, et al. Process and quality management of electroless nickel–phosphorus alloy plating on large-aperture optical reflection mirror[J]. Electroplating & Finishing, 2008(10): 13-16. https://www.cnki.com.cn/Article/CJFDTOTAL-DDTL200810008.htm
[6]	孟晓辉, 王永刚, 李文卿, 等. 应用旋转法实现大口径非球面反射镜零重力面形加工[J]. 光学精密工程, 2019, 27(12): 2517-2524. https://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201912003.htm MENG Xiaohui, WANG Yonggang, LI Wenqing, et al. Fabrication of zero-gravity surface for large-aperture aspherical mirror by using rotationally method[J]. Optics and Precision Engineering, 2019, 27(12): 2517-2524. https://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201912003.htm
[7]	孙熠璇, 罗世魁, 高超, 等. 大口径空间反射镜的重力卸载优化方法[J]. 红外与激光工程, 2021, 50(1): 279-287. https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ202101031.htm SUN Yixuan, LUO Shikui, GAO Chao, et al. Optimization method for large-aperture space mirror's gravity unload[J]. Infrared and Laser Engineering, 2021, 50(1): 279-287. https://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ202101031.htm
[8]	马文静, 徐振源, 曹庭分, 等. 大口径反射镜低应力夹持优化设计[J]. 中国激光, 2020, 47(11): 187-192. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ202011021.htm MA Wenjing, XU Zhenyaun, CAO Tingfen, et al. Optimal design of low-stress mounting for large aperture mirror[J]. Chinese Journal of Lasers, 2020, 47(11): 187-192. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ202011021.htm
[9]	肖建国, 张万清, 刘尧, 等. 金属反射镜的三轴联动加工方法[P]. 中国, 20171460886.8, 2020. XIAO Jianguo, ZHANG Wanqing, LIU Yao, et al. Three-axis linkage processing method of metal reflector[P]. China, 20171460886.8, 2020.