Citation: | LI Huan, HU Liang, MENG Xiangfu, LI Qi, WANG Shuang. Simulation Analysis of Thermal-Structure of an Optical Detection System[J]. Infrared Technology , 2020, 42(12): 1141-1150. |
[1] |
张义广, 杨军, 朱学平, 等.非制冷红外成像导引头[M].西安:西北工业大学出版社, 2009.
ZHANG Yiguang, YANG Jun, ZHU Xueping, et al. Uncooled Infrared Seeker[M]. Xi'an: Northwestern Polytechnical University Press, 2009.
|
[2] |
江乐果, 王一波, 焦彤, 等.吊舱平台微电机转子系统的分岔特性分析[J].飞控与探测, 2019, 2(4): 77-82. http://www.cqvip.com/QK/73078X/20194/7100053286.html
JIANG Leguo, WANG Yibo, JIAO Tong, et al. Bifurcation characteristics analysis of micro-motor rotor system of optoelectronic pod platform[J]. Flight Control & Detection, 2019, 2(4): 77-82. http://www.cqvip.com/QK/73078X/20194/7100053286.html
|
[3] |
邓准, 吕琦, 那佳, 等.光学导引头探测器的装调技术研究[J].航天制造技术, 2014(1): 53-56. http://d.wanfangdata.com.cn/Periodical/htgy201401014
DENG Zhun, LV Qi, NA Jia, et al. Research on assembly and debugging technology of the detector of optical seeker[J]. Aerospace Manufacturing Technology, 2014(1): 53-56. http://d.wanfangdata.com.cn/Periodical/htgy201401014
|
[4] |
姬文晨, 张宇, 李茂忠.透射式红外光学系统的光机热集成分析[J].红外技术, 2015, 37(8): 73-77. http://d.wanfangdata.com.cn/Periodical/hwjs201508012
JI Wenchen, ZHANG Yu, LI Maozhong. Integrated optomechanical -thermal analysis of refractive infrared optical system[J]. Infrared Technology, 2015, 37(8): 73-77. http://d.wanfangdata.com.cn/Periodical/hwjs201508012
|
[5] |
王勖成.有限单元法[M].北京:清华大学出版社, 2003.
WANG Xucheng. Finite Element Method[M]. Beijing: Tsinghua University Press, 2003.
|
[6] |
张昭, 蔡志勤.有限元方法与应用[M].大连:大连理工大学出版社, 2011.
ZHANG Zhao, CAI Zhiqin. Finite Element Method and Its Application[M]. Dalian: Dalian University of Technology Press, 2011.
|
[7] |
CHEN K K, LI F P, ZHAO Y S. FEA of thermal characteristic of motorized spindle based on ANSYS workbench[J]. Applied Mechanics & Materials, 2013, 437: 36-41. https://www.scientific.net/AMM.437.36
|
[8] |
顾建军, 孙逊, 蒋苏苏.基于ANSYS Workbench的行星滚柱丝杠动态特性分析[J].飞控与探测, 2019, 2(6): 82-88. http://d.wanfangdata.com.cn/periodical/fkytc201906012
GU Jianjun, SUN Xun, JIANG Susu, et al. Dynamic characteristics analysis of planetary roller screw based on ANSYS workbench[J]. Flight Control & Detection, 2019, 2(6): 82-88. http://d.wanfangdata.com.cn/periodical/fkytc201906012
|
[9] |
周连军, 韩福忠, 白丕绩, 等.高温碲镉汞中波红外探测器的国内外进展[J].红外技术, 2017, 39(2): 116-124. http://hwjs.nvir.cn/article/id/hwjs201702002
ZHOU Lianjun, HAN Fuzhong, BAI Piji, et al. Review of HOT MW infrared detector using MCT technology[J]. Infrared Technology, 2017, 39(2): 116-124. http://hwjs.nvir.cn/article/id/hwjs201702002
|
[10] |
ZHANG W, YAO X, WU X Q, et al. Application of ANSYS in thermal analysis of pyroelectric thin film infrared detector[J]. Journal of Transcluction Technology, 2004, 17(1): 98-100. http://www.ir.xjtu.edu.cn/item/ir/7517
|
[11] |
王春红, 向阳.超光谱成像探测系统的线阵CCD平均调制传递函数[J].红外技术, 2009, 31(5): 249-251. doi: 10.3969/j.issn.1001-8891.2009.05.001
WANG Chunhong, XIANG Yang. Research on average MTF of line-array CCD with contrast method[J]. Infrared Technology, 2009, 31(5): 249-251. doi: 10.3969/j.issn.1001-8891.2009.05.001
|